Products - Monit Motorsport

Product has been added to your cart.

Categories

Please note that shipping is only available for delivery to Poland from the e-commerce store you have selected.

Rally Computers

G Series

G-100+

With its careful selection of essential features, the Monit G-100+ model is the perfect entry-level rally computer for professional rally teams. The compact and light-weight design combined with the simple installation afforded by GPS make it easy to fit into any modern, classic or historic rally vehicle.
It is also ideal for use in rally reconnaissance (recce) vehicles.

Price:

€466.00

G-200+

The premium Monit G-200+ rally computer has all the features required for the highest level of competition, with the same simple-to-use design as the G-100+. Used by leading rally teams around the World, the Monit G-200+ is the ideal choice for competitors that demand the most from their equipment.

Price:

€544.00

Q Series

Q-10

Our most affordable rally computer, the Monit Q-10 is ideal for club-competitors on a budget, or specialised events where only basic distance measurement is allowed. The Q-10 has two accurate five-digit distance counters that can be individually cleared.

Price:

€234.00

Q-20

The Monit Q-20 rally computer has the same two distance counters as the Q-10, but with the addition of current and average speed measurements. Ideal for club-competitors involved in blind, pace note, or regularity type events.

Price:

€274.00

GPS Antenna

Magnetic GPS/GNSS Antenna – PR004

The Monit magnetic mount antenna is a high-sensitivity GPS/GNSS antenna that is tuned specifically to provide maximum accuracy for the Monit G-Series+ rally computers. With a strong magnet built into the base, the GPS antenna can clamp onto the steel roof of a vehicle, simplifying installation and removal.

For gravel events or high performance vehicles the addition of high bond adhesive tape is recommended to prevent excessive movement.

Note: To achieve the best performance from the new G-Series+ rally computers it is essential to use a genuine Monit GPS/GNSS antenna that is manufactured in 2019 or later.

Price:

€39.90

Bulkhead GPS Antenna – PR005

The Monit bulkhead mount antenna is a high-sensitivity GPS/GNSS antenna with an integrated screw mounting stud and nut. This can be used to securely fasten the antenna through a vehicle’s roof or to a suitable mounting bracket. The mounting stud and antenna housing are sealed to prevent water ingress if a hole is made in the roof to accommodate the low profile antenna.

Note: To achieve the best performance from the new G-Series+ rally computers it is essential to use a genuine Monit GPS/GNSS antenna that is manufactured in 2019 or later.

Price:

€39.90

Speed Sensors

Inductive Wheel Probe – PR001

The Monit inductive wheel probe works by detecting the presence of metal as it is brought near the end of the sensor. It is typically fitted to a vehicle’s wheel hub so that it senses the back of the wheel studs or other metal detection targets as they rotate past. In this way, it can be used to measure speed and distance on a wide variety of modern, classic and historic vehicles.

Suitable for all types of vehicles that do not have a factory fitted speed sensor.

Price:

€39.90

Speed Sensor (VSS) Interface – PR002

The speed sensor interface allows you to use a gearbox or differential mounted factory electronic speed sensor to operate a Monit rally computer. It will work with most types of sensors, and signals, that produce either an analogue or digital pulse output. The interface contains special noise filtering circuitry to prevent interference and eliminate ground loop problems.

Price:

€39.90

ABS Sensor Interface – PR003

The ABS interface takes the signal produced by an ABS Wheel Speed Sensor and converts it into a format that can be used to operate a Monit rally computer. It will work with most types of two wire ABS sensors that generate an analogue output signal.

The interface can only be used with ABS wheel speed sensors that have been disconnected and are no longer used by the vehicle’s safety systems. It must not be fitted to any vehicle that still uses its ABS system.

Price:

€39.90

Accessories

AC001 – Spare Wiring Loom (G-Series)

Use the spare loom if your original loom is lost or damaged, or you want to share a G-Series+ (or older T-Series) rally computer between two different vehicles.

Price:

€39.90

AC002 – Probe Wiring Extension Kit

Use to extend the distance between a wheel speed sensor and the rally computer. The kit includes both a 1m and 2m extension lead.

Price:

€39.90

AC003 – Foot Reset Switch

This robust foot switch can be used to perform many useful functions such as clearing the tripmeter counters or controlling the stopwatch.

Price:

€39.90

AC004 – Door Mount Bracket

The aluminium door bracket provides an easy way to mount a Monit tripmeter to the door of your vehicle. Suits all Monit models and left or right hand drive vehicles.

Price:

€49.90

AC005 – Dashboard Mount Bracket

This high-quality aluminium bracket is a simple and elegant way to mount a Monit rally computer to the dash board of your vehicle. Suits all models.

Price:

€49.90

AC006 – Windscreen Suction Mount

Ideal for temporary installations or non-competition vehicles, the windscreen mount bracket is fitted with a strong suction cup for quick installation. Suits all models.

Price:

€49.90

AC007 – Recce Car Kit (G-Series)

Combining a cigarette lighter adaptor, basic hand reset switch and windscreen suction mount, the recce car kit makes temporary installation of a G-Series+ rally computer quick and easy.

Price:

€91.50

AC008 – Speed Alarm Light (G-200+ only)

An active powered 16 LED light array that is designed to be triggered by the Monit G-200+. User selectable activation speed from the menu of the G-200+.

Price:

€49.90

AC009 – 3-Button Hand Remote (G-series+ only)

A 3-button hand remote for use with the Monit G-Series+. Allows quick adjustment of distance up or down on the fly, the third button clears the distance or reverses the counting direction. Suits G-Series+ only.

Price:

€58.90

AC010 – 2-Button Hand Remote

A 2-button hand remote switch which can be used to control many useful user selectable functions, such as clearing distance counters, resetting average speed, or controlling stopwatch.

Price:

€58.90

Brake Dial

Brake Dial – Square mount, orange

The Monit Brake dial remote bias adjuster with a cost effective standardised square mounting plate design.

The mounting holes allow for quick replacement of a previously fitted bias adjuster that has a square mounting plate.

Includes full accessory pack with; cable and clamps, adaptors, fasteners and rotation direction labels.

Orange dial colour.

Price:

€245.00

Brake Dial – Square mount, black

The Monit Brake dial remote bias adjuster with a cost effective standardised square mounting plate design.

The mounting holes allow for quick replacement of a previously fitted bias adjuster that has a square mounting plate.

Includes full accessory pack with; cable and clamps, adaptors, fasteners and rotation direction labels.

Black dial colour.

Price:

€245.00

Brake Dial – Bulkhead mount, orange

The premium version of the Monit Brake Dial remote bias adjuster.

The threaded mounting, and matching nut, allow for the easiest installation and visual integration with the control panel area of a vehicle.

Includes full accessory pack with; cable and clamps, adaptors, fasteners and rotation direction labels.

Orange dial colour.

Price:

€289.00

Brake Dial – Bulkhead mount, black

The premium version of the Monit Brake Dial remote bias adjuster.

The threaded mounting, and matching nut, allow for the easiest installation and visual integration with the control panel area of a vehicle.

Includes full accessory pack with; cable and clamps, adaptors, fasteners and rotation direction labels.

Black dial colour.

Price:

€289.00